Suggestions & Solutions

Quick & easy floor renovation with the water-based floor varnish RENOVATION in 3 simple steps

RENOVATION FLOOR VARNISH is designed for varnished or pre-varnished woods made from European or exotic species, and laminates.

  • Makes wooden floors look like new
  • Resistant to everyday use (stains, traffic, etc.)
  • Durable protection

Proper floor preparation is absolutely essential to achieve a perfect result. The surface must be clean, dry, free of dust or grease. Polish lightly (No. 120 or 240) and carefully remove all dust. Then wash the floor thoroughly with a suitable cleaner and proceed to apply the varnish.

RENOVATION FLOOR VARNISH is suitable for wooden floors of all types (prefinished, varnished, laminate). It is compatible with underfloor heating systems, but is not suitable for outdoor use and for floors covered with oil or wax. Ideal conditions for application: between 12°C and 25°C on dry wood protected from moisture. When applied it is milky and becomes transparent after drying.

  • Apply the product richly by applying crosswise and finish in the direction of the wood fibres.
  • Allow to dry for 3 hours.

After the surface has dried, lightly gloss (No. 150) and remove dust. Then apply the 2nd coat. To achieve the best result in terms of performance and durability, 2 coats are necessary. You can use the space after 24 hours.


  • If you deem it necessary apply a 3rd coat, without glossing between coats.
  • Laminate floors: No need to gloss between coats on Laminate floors. The 2nd coat is applied directly.

Related Products